Topics
Browse everything PrintLabGuide publishes by category and tag: every topic covered here, with the most recent guides listed under each one.
Tags
- #calibration 14
- #fdm 11
- #reference 6
- #bed-leveling 3
- #extrusion 3
- #marlin 3
- #pla 3
- #abs 2
- #chamber-temperature 2
- #e-steps 2
- #enclosure 2
- #klipper 2
- #nozzle 2
- #retraction 2
- #troubleshooting 2
- #tutorial 2
- #warping 2
- #workflow 2
- #adhesion 1
- #asa 1
- #bed-adhesion 1
- #bed-surfaces 1
- #bltouch 1
- #bowden 1
- #brass 1
- #buying-guide 1
- #checklist 1
- #comparison 1
- #creality 1
- #dimensional-accuracy 1
- #dry-box 1
- #ender-3 1
- #ender-3-v2 1
- #ender-3-v3 1
- #fdm-vs-resin 1
- #filament 1
- #filament-comparison 1
- #first-layer 1
- #flow-rate 1
- #garolite 1
- #glass 1
- #hotend 1
- #how-to 1
- #input-shaping 1
- #layer-height 1
- #linear-advance 1
- #material-strength 1
- #mk8 1
- #msla 1
- #orcaslicer 1
- #pei 1
- #petg 1
- #pressure-advance 1
- #print-speed 1
- #process-selection 1
- #quality 1
- #ringing 1
- #settings 1
- #slicer-settings 1
- #stringing 1
- #temperature 1
- #tuning 1
Categories
calibration 10 posts
- PLA Retraction Settings for Bowden Tube: Values and TestsStart PLA on a Bowden printer at 5 mm retraction and 40-60 mm/s, then tune with a 1-6 mm tower. Slicer fields, pressure advance and hardware fixes.
- 3D Printer Calibration Order: What to Tune FirstThis 3D printer calibration order starts with mechanical checks and bed leveling, then covers e-steps, temperature, flow, pressure advance, and retraction.
- Pressure Advance Calibration: Klipper and Marlin K FactorCalibrate pressure advance in Klipper (including smooth time), Marlin Linear Advance M900 K and OrcaSlicer to fix bulged corners and starved line starts.
- How to Level a Bed With BLTouch: Marlin and Klipper GuideHow to level a bed with BLTouch in Marlin and Klipper: mechanical tramming, mesh leveling, Z-offset tuning, and the traps that silently skip the mesh.
- Ender 3 E-Steps & Steps per mm: Exact Values and CalibrationFind documented Ender 3 steps per mm, read the active E value, calibrate with Marlin G-code, save to EEPROM and check firmware differences by model.
- Bed Leveling: Manual vs Auto and How ABL Probes WorkWhat bed leveling actually corrects, how manual and automatic leveling differ, and how inductive, capacitive, and touch probes sense the bed surface.
reference 4 posts
- Nozzle Size and Layer Height: How to Choose Both TogetherNozzle diameter and layer height are not independent settings, because one constrains the other. How to pick both for detail, strength, or print speed.
- Chamber Temperature by Material: An Enclosure ReferenceA reference guide to chamber (ambient) temperature for FDM materials: which need a hot enclosure, which want open air, target ranges, and why PLA suffers.
- Filament Dry Box vs Heated Chamber: Calibration SetupSeparate filament drying, dry-box feeding and heated print chambers, then keep spool condition and enclosure settings consistent during calibration.
- 3D Printer Bed Surface Guide: PEI, Glass, GaroliteBed surface choice affects adhesion, release, warp resistance, and finish. A reference covering PEI, glass, Garolite, BuildTak, and magnetic flex plates.
troubleshooting 2 posts
- Why Are My 3D Prints Warping at Corners — and How to Stop ItCorner warping in FDM printing is thermal contraction, not bad bed adhesion. Here is the physics, per-material temperatures, and a ranked fix hierarchy.
- How to Fix Stringing on 3D Prints: Retraction SettingsStringing comes from retraction, temperature, and travel speed. Starting values for direct-drive and Bowden setups, plus a calibration sequence that works.